Design Options
Digital billboards can be one-sided or two-sided. The second side can have a static poster, a blank wall or another LED display. It can be supplied with a rectangular or round pole.
-
6 m² (2.88 × 1.92 m)
-
7.4 m² (3.84 × 1.92 m)
-
11 m² (3.84 × 2.88 m)
-
16.6 m² (5.76 × 2.88 m)
-
18 m² (6 × 3 m)
Digital Displays
They differ in the type of LED modules and pixel pitch. There are two types of modules available — SMD and DIP.
Display Components
The display consists of cabinets that include LED modules, units to power these modules and cards that receive the video signal.
-
All internal electronic
components are grounded -
Operation in the temperature
range from ‒40 to 50 °С -
Electrical wiring is made according
to electrical installation rule -
Waterproofed system unit
-
Display lifespan —
more than 10 years
Distributor Box
Inside the structure the closed system block which consists of a control system, multi-card, elements of power supply and protection against lightning blow settles down.
The system unit is equipped with external indicators and switches. It moves on rails, allowing access to any part of the display.
Our displays include Macroblock (MBI) power drivers. Delta power supplies are used to extend the temperature range of LED displays.
In the production of LED displays, our company DiMedia uses high quality components:
- NationStar LEDs with gold conductor
- Macroblock MBI5124 power drivers with 1920 Hz update rate
- Includes NovaStar remote control screen system
- Delta CE power supply units DPS-300AB-76 B CE with spare capacity of 25% and ventilation sensor
to the frame
Remote Connection
Digital displays can be set up and managed remotely from anywhere in the world via the Internet. Connection to the global network is made through network cards, Wi-Fi and GSM (3G, 4G) modules.
Three Types of Poles
Rectangular, round and square shapes are available.
ABS cladding
Conceals the kerchiefs and flange, and its sliding bottom part helps to conceal the anchor bolts if the foundation is not deep enough.
Multi-Component Profile System
A unique design composed of seven profiles. Hardened aluminium alloy 6063 (AD31) with high corrosion resistance.
-
The middle profile connects the basic profiles of the frame
-
The upper profile carries the load of the structure
-
The profile of the frame surrounds the structure
-
The clamp profile is equipped with a special rubber seal for additional protection of the structure from the external environment
-
The clamp profile is equipped with a special rubber seal for extra protection of structure from the external environment
-
The silkscreen profile hides internal elements of the structure on the static poster side
-
Lower cladding profile
Frame
A special double-circuit frame with reinforced trusses is used for use in areas with high wind load classes.
Ease of Use
We pay special attention to safe operation in various weather conditions. Safety hinges prevent the doors from breaking in the event of icing, and gas springs prevent the doors from closing in the event of wind gusts.
Safety hinges
Dislodgement and squeezing of the door from the frame in case of icing of internal gutters are excluded.
Eye fasteners
Fasteners for safe lifting of the structure and mounting at height.
Gas springs
Provide easy opening and locking of the door for safe maintenance of the structure.
Internal locks
They provide concealed protection against vandalism and secure the doors.
Transport end locks
They ensure a tighter fit of the door to the frame of the stucture.
Ventilation System
Special perforation of the lower lining profile and eight of the upper-end fans provide air circulation to maintain the required temperature and humidity level inside the structure.
- Perforation of the lower lining profile provides constant air flow
- Fans bring out hot air from the Digital Billboard
Extra Equipment
The operational capabilities of digital displays can be extended by connecting extra equipment.
-
Auto dimming by light sensor
Depending on the illumination, automatically adjusts the LED brightness level.
-
Equipment for communication via Wi-Fi and mobile networks
Allows you to configure a wireless connection to your screen management system, including 3G and 4G (LTE) networks.
-
Sound system
Adds the ability to output sound to the content being broadcast on the digital display.
-
LED display internal volume heating system
Required to use the LED display in particularly cold climates.
-
Ambient temperature sensor
Allows you to display information about the current outdoor temperature.
-
Electricity metering unit
May be with manual readout or with automatic sending to the power supply company.
-
Video surveillance system
Allows you to monitor the screen remotely and control the content of the broadcast.
Software
NovaStar video systems are used in DiMedia displays and software is supplied with them: NovaStudio for controlling the display and SmartLCT for its adjustment and calibration.
NovaStudio
- – Video uploads
- – Connecting online broadcasts
- – Creating text messages
- – Time and temperature widgets
User manual
SmartLCT
- – Screen settings
- – Color adjustments
- – Calibration
- – Backing up
User manual
Any color from
the RAL Classic catalogue
The polymer powder painting method is used. End and front elements can be painted in different colors according to the customer's request.
International Shipping
Delivery is carried out by own DiMedia trucks or by means of transport companies. Up to 8 assembled Digital Вillboards (including poles) and up to 15 as a self-assembly kit can be transported in a low-frame or open top container.
- By Sea
- On the roads
- Railway tracks